Instruments à cotes fixes et à cotes variables, Marbres…
0 à 300 mm sur les cotes fixes
0 à 1 000 mm sur les cotes variables
Expert calibration lab in
Bordeaux – France
Opening hours
33700 MÉRIGNAC

CAPABILITIES
Dimensional
Instruments à cotes fixes et à cotes variables, Marbres…
0 à 300 mm sur les cotes fixes
0 à 1 000 mm sur les cotes variables
Electricity
Électricité HF / BF : Multimètre, Oscilloscope, Générateur, Amplificateur, Analyseur de spectre, Pince ampèremétrique, Ohmmètre, Diélectrimètre, Pont de mesure RLC, Carte VXI…
Fréquencemètre jusqu’à 20 GHz
Analyseur de spectre jusqu’à 20 GHz
Force
Dynamomètre, Peson, Pince à collier, Tensiomètre de câble…
Traction / Compression jusqu’à 100 kN
Tensiomètre
Humidity
Hygromètre
- Humidité relative de 30% HR à 90 % HR
Pressure / Vacuum
Manomètre, Capteur de pression, Soupape, Pressostats, Banc anémométrique, Poignée de gonflage, Altimètre, Variomètre, Valise Pitot…
- Pression relative de -1 bar à 1 000 bar
- Pression absolue de 1 mbar à 25 bar
Radiometry / Photometry
Luxmètre, Luminancemètre, Radiomètre, Densitomètre, Négatoscope, Détecteur de défaut ultrason et courant de Foucault…
- Luxmètre jusqu’à 10 000 lx
- Luminancemètre jusqu’à 20 000 cd/m²
- Radiomètre UVA de 70 à 7 000 µW/cm²
- CND Ultrason et Courant de Foucault
Temperature
Chaines de température, Hygromètre, Pyromètre, Thermocouple, Enceinte, Four…
- Température : -60 °C à 1100 °C
- Humidité relative de 30% HR à 90 % HR
- Pyrométrie : 30 °C à +500 °C
- Caractérisations d’enceintes thermostatiques et climatiques selon référentiels FD X15-140 et AMS 2750
Torque
Clé dynamométrique, Tournevis dynamométrique, Visseuse, Couplemètre…
- Clé et tournevis de 0,1 N.m à 1 000 N.m
- Couplemètre de 1 N.m à 500 N.m
Testing machines
Force : ISO 7500-1 et ASTM E4 de 1 kN à 200 kN en traction et de 1 kN à 1000 kN en compression
Dureté : Brinell : ISO 6506-2 et ASTME 10, Rockwell : ISO 6508-2 ASTM E18, Vickers : ISO 6507-2 et ASTM E384
Mouton-pendule : NF EN ISO 148-2
Extensomètre : NF EN ISO 9513, ASTM E83
Thermal and climatic testing
Caractérisations d’enceintes thermostatiques et climatiques selon référentiels FD X15-140 et AMS 2750
Accelerometry
Global Calibration Scope
- Shock: between 20g and 5,000g (subject to device weight and voltage output)
- Accelerometer: 0.1 m/s² to 750 m/s² (0.4 Hz to 10 kHz…)
Common equipment serviced: Integrated piezoelectric electronics, Piezoelectric accelerometers, Piezoresistive accelerometers, Charge amplifiers and systems
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Chemical
Global Calibration Scope
- Viscosity: kinematic and dynamic, consistometric cup, etc.
- Conductivity: Electrical (0 μS/cm to 200 mS/cm) and with Certified Reference Material (1,1 μS/cm to 111,3 mS/cm)
- Gas detector and Gas Concentration : Carbon monoxide, Nitrogen monoxide, Nitrogen dioxide, Oxygen, Total gaseous organic carbon, Dilution apparatus for olfactometry, Sulfur dioxide, Carbon dioxide, Hydrogen sulfide, Benzene, Methane, Ozone, Propane, etc.
- Refractometry: (1.33 ~ 1.62) nD (refractive index), 0 to 87.6% Brix, etc.
Common equipment serviced: Conductivity meters, Salinity meters, pH meters, Sucrose solutions, Gas detectors and gas concentration, Particle counters, Refractometry instruments, Viscosity instruments
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Gas flow
Global Calibration Scope: Gas flow (air): 0.5 ml/min to 4000 m3/h (the range is lower depending on gas used (nitrogen, argon or any inert gases)
Common equipment serviced: Anemometers (thermal & vane), Bubble flowmeters, Gas flow meters, Gas meters, Thermal mass flow controllers, Variable area flow meters, Backflow gages, Flow analyzers, Gas flow meters, Flow transducers, Flow transmitters, Leak testers, Orifices, Rotameters, Turbine meters
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Liquid flow
Global Calibration Scope: Liquid flow (water): 0.12 l/h to 120 m3/h; Liquid flow (Hydrocarbon oils (Kerosene, Gas oil, Shell Tellus 32, Shell Tellus 100)): 0.6 l/min to 3000 l/min
Common equipment serviced: Liquid flow meter, Backflow gages, Flow analyzers, Gas flow meters, Flow transducers, Flow transmitters, Leak testers, Orifices, Rotameters, Turbine meters
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Mass / Scale
Global Calibration Scope
- Mass: 1 mg to 1000 kg (range depending to class less than E2, F2, M1…)
- Scale: 1mg to 200 000 kg with weights class from E2, F1 to M1-2
- Legal metrology: maintenance and repair for scales up to 180 000 kg
Common equipment serviced: Weight, Weighing devices (Weighing scale, Hopper scale, Tank scale, Platform scale, etc), Weighing instruments for blood collection bags
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Volume
Global Calibration Scope
- Volumetric Instruments (Beakers, Volumetric Containers…): up to 20 000 mL
- Pipette: 0.1µL up to 1 000 mL
- Syringe: up to 200 mL
Common equipment serviced: Burettes, Flask, Syringe, Pipettes, Test tubes, Beakers, Dispenser, Tanks, Vessels, Gauge overflow, Gauge windows, Concrete air content meters, Level probes Pycnometers, Titrators
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Électricité HF / BF : Multimètre, Oscilloscope, Générateur, Amplificateur, Analyseur de spectre, Pince ampèremétrique, Ohmmètre, Diélectrimètre, Pont de mesure RLC, Carte VXI…
Fréquencemètre jusqu’à 20 GHz
Analyseur de spectre jusqu’à 20 GHz
Dynamomètre, Peson, Pince à collier, Tensiomètre de câble…
Traction / Compression jusqu’à 100 kN
Tensiomètre
Hygromètre
- Humidité relative de 30% HR à 90 % HR
Manomètre, Capteur de pression, Soupape, Pressostats, Banc anémométrique, Poignée de gonflage, Altimètre, Variomètre, Valise Pitot…
- Pression relative de -1 bar à 1 000 bar
- Pression absolue de 1 mbar à 25 bar
Luxmètre, Luminancemètre, Radiomètre, Densitomètre, Négatoscope, Détecteur de défaut ultrason et courant de Foucault…
- Luxmètre jusqu’à 10 000 lx
- Luminancemètre jusqu’à 20 000 cd/m²
- Radiomètre UVA de 70 à 7 000 µW/cm²
- CND Ultrason et Courant de Foucault
Chaines de température, Hygromètre, Pyromètre, Thermocouple, Enceinte, Four…
- Température : -60 °C à 1100 °C
- Humidité relative de 30% HR à 90 % HR
- Pyrométrie : 30 °C à +500 °C
- Caractérisations d’enceintes thermostatiques et climatiques selon référentiels FD X15-140 et AMS 2750
Clé dynamométrique, Tournevis dynamométrique, Visseuse, Couplemètre…
- Clé et tournevis de 0,1 N.m à 1 000 N.m
- Couplemètre de 1 N.m à 500 N.m
Force : ISO 7500-1 et ASTM E4 de 1 kN à 200 kN en traction et de 1 kN à 1000 kN en compression
Dureté : Brinell : ISO 6506-2 et ASTME 10, Rockwell : ISO 6508-2 ASTM E18, Vickers : ISO 6507-2 et ASTM E384
Mouton-pendule : NF EN ISO 148-2
Extensomètre : NF EN ISO 9513, ASTM E83
Caractérisations d’enceintes thermostatiques et climatiques selon référentiels FD X15-140 et AMS 2750
Réparation mécanique et électronique de sous-ensembles et équipements de mesure et d’essais, de cartes électroniques et systèmes industriels, Expertise et diagnostic…
CND Ultrason et Courant de Foucault
INGÉNIERIE
Prototypage, Conception & Fabrication de tiroirs de sécurisation et intégrateurs…
Tiroirs de sécurisation pour baies de mesures et intégrateurs
Préleveurs d’air pour diagnostic fibre Amiante
Préleveurs d’air à l’émission (rejets gazeux)
Expertise et conseil
MAINTENANCE
Maintien en Conditions Opérationnelles (MCO), Contrôles filaires, Maintenance d’alimentations…