Expert calibration lab in
Le Havre – France
Opening hours
76170 LA FRÉNAYE

CAPABILITIES
Radiometry / Photometry
Global Calibration Scope
- Illuminance: 0.5 to 20 000 lux
- Luminance: 0.2 to 15 000 ㏅/m2…
Common equipment serviced: Illuminance meter, Luminance meter, Spectrophotometer, Glossmeter, Photometer, Colorimeter, Pyranometer, Irradiance meter
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Mass / Scale
Global Calibration Scope
- Mass: 1 mg to 1000 kg (range depending to class less than E2, F2, M1…)
- Scale: 1mg to 200 000 kg with weights class from E2, F1 to M1-2
- Legal metrology: maintenance and repair for scales up to 180 000 kg
Common equipment serviced: Weight, Weighing devices (Weighing scale, Hopper scale, Tank scale, Platform scale, etc), Weighing instruments for blood collection bags
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Chemical
Global Calibration Scope
- Viscosity: kinematic and dynamic, consistometric cup, etc.
- Conductivity: Electrical (0 μS/cm to 200 mS/cm) and with Certified Reference Material (1,1 μS/cm to 111,3 mS/cm)
- Gas detector and Gas Concentration : Carbon monoxide, Nitrogen monoxide, Nitrogen dioxide, Oxygen, Total gaseous organic carbon, Dilution apparatus for olfactometry, Sulfur dioxide, Carbon dioxide, Hydrogen sulfide, Benzene, Methane, Ozone, Propane, etc.
- Refractometry: (1.33 ~ 1.62) nD (refractive index), 0 to 87.6% Brix, etc.
Common equipment serviced: Conductivity meters, Salinity meters, pH meters, Sucrose solutions, Gas detectors and gas concentration, Particle counters, Refractometry instruments, Viscosity instruments
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Acoustics
Global Calibration Scope
- Free-field calibration: 125 Hz…20 kHz (sound pressure level 75 dB to 94 dB)
- Pressure calibration (in an electroacoustic coupler): 31.5 Hz to 16 kHz (64 dB to 114 dB)
- Pressure calibration (two-point with pistonphone and calibrator): 250 Hz (94 dB, 114 dB or 124 dB) and 1 kHz (94 dB or 114 dB)
- Pressure chamber, low frequency (only factory calibration possible): 0.1 Hz to 31.5 Hz (124 dB)
- Full electrical calibration
Common equipment serviced: Sound level meters, Measurement microphones, Acoustic calibrators, pistonphones and multi-tone calibrators, Noise dosimeters, Outdoor and surface microphones, Sound intensity probes
This site holds the competency for the specified domain. If your requirement is outside the scope of competency, we may be able to transfer the instrument with your permission to another Trescal laboratory that holds the applicable scope. Please refer to the scope of accreditation for accredited capabilities specific to this laboratory.
Dimensional
Moyens à cotes fixes et variables…
Cales étalon : L < 1 000 mm
Bague lisse : Ø < 250 mm
Tampon lisse : Ø < 300 mm
Bague filetée : Ø < 125 mm
Tampon fileté : Ø < 300 mm
Pige : Ø < 20 mm
Broche de longueur : L < 1 000 mm
Pied à coulisse, Jauge de profondeur, Micromètre extérieur : L < 2 000 mm
Comparateur (levier ou tige rentrante, numérique ou mécanique) : L < 100 mm
Alésomètre : Ø < 275 mm
Colonne de mesure, Trusquin : L < 1 000 mm
Niveau, Clinomètre : 0 à 90°
Spécificités
Étalonnage sur site de Machines 3D (comparaison directe)
Marbre, Projecteur de Profil…
Electricity
Multimètres, Oscilloscopes, Alimentations, Générateurs, Résistances, Inductances, Capacités, Calibrateurs…
Tension Continue : 10 mV à 1 100 V (15 kV en mesure)
Tension Alternative : 100 mV à 1 000 V de 10 Hz à 100 kHz (10 kV en mesure)
Courant Continu : 10 nA à 20 A (100 A en mesure)
Courant Alternatif : 10 µA à 20 A de 40 Hz à 5 kHz
Résistance : 1 mΩ à 100 GΩ
Inductance : 1 mH à 10 mH
Capacités : 1 nF à 1 mF
Vitesse : de 0 à 100 000 tr/mn
Force
Capteurs de force, Chaînes de force, Dynamomètres, Pesons…
Traction jusqu’à 50 kN et Compression jusqu’à 500 kN
Balances de Pesée : jusqu’à 200 kg
Humidity
Hygromètres,
Hygrométrie : 10 % à 90 % HR 10 °C à 90 °C
Pressure / Vacuum
Capteurs de pression, Manomètres, Calibrateurs…
50 mbar à 3,5 bar en pression absolue
-0,95 bar à 700 bar en pression relative
Temperature
Capteurs de température, Hygromètres, Indicateurs, Enregistreurs, Calibrateurs…
Génération de Température : -40 °C à 1 200 °C
Simulation Électrique de Température : -100 °C à 1 200 °C
Hygrométrie : 10 % à 90 % HR 10 °C à 90 °C
Torque
Outils dynamométriques
Clés et tournevis dynamométriques (1 500 N.m)
Moyens à cotes fixes et variables…
Cales étalon : L < 1 000 mm
Bague lisse : Ø < 250 mm
Tampon lisse : Ø < 300 mm
Bague filetée : Ø < 125 mm
Tampon fileté : Ø < 300 mm
Pige : Ø < 20 mm
Broche de longueur : L < 1 000 mm
Pied à coulisse, Jauge de profondeur, Micromètre extérieur : L < 2 000 mm
Comparateur (levier ou tige rentrante, numérique ou mécanique) : L < 100 mm
Alésomètre : Ø < 275 mm
Colonne de mesure, Trusquin : L < 1 000 mm
Niveau, Clinomètre : 0 à 90°
Spécificités
Étalonnage sur site de Machines 3D (comparaison directe)
Marbre, Projecteur de Profil…
Multimètres, Oscilloscopes, Alimentations, Générateurs, Résistances, Inductances, Capacités, Calibrateurs…
Tension Continue : 10 mV à 1 100 V (15 kV en mesure)
Tension Alternative : 100 mV à 1 000 V de 10 Hz à 100 kHz (10 kV en mesure)
Courant Continu : 10 nA à 20 A (100 A en mesure)
Courant Alternatif : 10 µA à 20 A de 40 Hz à 5 kHz
Résistance : 1 mΩ à 100 GΩ
Inductance : 1 mH à 10 mH
Capacités : 1 nF à 1 mF
Vitesse : de 0 à 100 000 tr/mn
Capteurs de force, Chaînes de force, Dynamomètres, Pesons…
Traction jusqu’à 50 kN et Compression jusqu’à 500 kN
Balances de Pesée : jusqu’à 200 kg
Hygromètres,
Hygrométrie : 10 % à 90 % HR 10 °C à 90 °C
Capteurs de pression, Manomètres, Calibrateurs…
50 mbar à 3,5 bar en pression absolue
-0,95 bar à 700 bar en pression relative
Capteurs de température, Hygromètres, Indicateurs, Enregistreurs, Calibrateurs…
Génération de Température : -40 °C à 1 200 °C
Simulation Électrique de Température : -100 °C à 1 200 °C
Hygrométrie : 10 % à 90 % HR 10 °C à 90 °C
Outils dynamométriques
Clés et tournevis dynamométriques (1 500 N.m)